Race setup. It's very oversteery in the first laps. Use same setup for qual with 100% tape.
Just sharing what I have .
It is a coil bind setup and seems to me to be very stable.
Your mileage may vary.
Daytona 500K Setups. Felt quite stable to me, possibly a little too much wear on the RF but works fine in a full run in draft.
These are the DMP setups from their webpage. Enjoy.
This may not be the very best setup, but if it helps you, mention DBF Motorsports.
this set up is from race2play offical.thank you i will be using it.
These are the DMP setups from their webpage. Enjoy.
Race setup, good tire wear
This may not be the very best setup, but if it helps you, mention DBF Motorsports
These are the DMP setups from their webpage. Enjoy.
Coil Bound Set. Trail break into turns not necessary but it is how I drive it into the corners.
Default setup provided by Robert Coulter that was left out of the patch.
These are the DMP setups from their webpage. Enjoy.
One of the Team KEM Sets to help people who mo one will help or share with.
Want a team that works together ? Try us , KEM
Fast setup but will toast your tyres if you don't drive smoothly.
These are the DMP setups from their webpage. Enjoy. 1 of 3.
These are the DMP setups from their webpage. Enjoy. 2 of 3.
These are the DMP setups from their webpage. Enjoy. 3 of 3.
Just a setup to get started with guys. Ran 20 laps and the tires were fine
Set up for Pocono Raceway Nov 2-2010 G27 Racing Wheel.
These are the DMP setups from their webpage. Enjoy.
17.1 best but kills the tyres if you push it.
2009 Montreal set - use it as a baseline (it gets you round the tighter turns easy enoug)
900 Degrees, qual setup, 51.2xx
These are the DMP setups from their webpage. Enjoy.